Bare concrete soaks up every oil drip, road salt splash, and dropped paint can it ever meets, and no amount of scrubbing brings it back. At Elevated Garage Solutions, we install epoxy flooring in Salisbury, NC, and nearby areas, sealing that beat-up slab under a finish you can mop in about five minutes. Your garage stops looking like the one room in the house nobody finished.
Elevated Garage Solutions is a Salisbury, NC-based garage door supplier that also handles epoxy floor coatings for garages and basements. Solid colors, flake-and-chip blends, metallic finishes, and custom logos are all available, along with anti-slip additives for traction. Installations run from March through November, or any stretch when temperatures stay above 60 degrees Fahrenheit, since epoxy needs warmth to cure properly.
The complaints tend to sound alike. Dust that returns the moment you finish sweeping, oil rings that darken every year, cracks spreading a little further each season, and a floor so dingy it drags down everything you've stored on top of it. Basements bring their own version, with damp gray slabs that make a finished space feel unfinished.
Concrete is porous, which is the root of nearly all of it. Liquids soak straight in rather than sit on top, so stains set permanently, and freeze-thaw cycles widen cracks from the inside. The surface layer also wears away under tires and foot traffic, which is what that endless dust actually is. Roll-on kits from the hardware store fail for a related reason: they sit on the surface instead of bonding with it, and peel up in sheets about a year in.
Nearly all our work happens before any coating leaves the bucket. Grinding the concrete open gives the epoxy something to grab, and cracks and pits get filled. We run a moisture test first because slabs poured without a vapor barrier can push enough water through to lift a coating off. Coats go down in sequence with cure time between them, then a topcoat seals everything in. Comparing epoxy floor coating contractors usually comes down to who takes prep seriously, and that's where the difference shows up years later.
What you get is a floor that laughs off oil, chemicals, scratches, and hot tire pickup, cleans with a mop, and holds its color. Buyers notice a finished garage, so the upgrade tends to pay you back if selling is anywhere on your radar. As epoxy garage floor installers, we've watched plenty of customers start parking in a garage they'd quit using for anything but storage.
Here's an overview of what goes into the job and what you get to choose along the way.
The cured coating forms a hard shell over your concrete, shrugging off oil stains, chemical spills, scratches, and chipping. Water and salt stay out of the slab, which slows the cracking and spalling that shorten a floor's life. Well-installed epoxy garage floors hold up for many years under daily use.
Cleaning drops to a quick pass with a mop or a hose, since spills sit on the surface instead of soaking in. Dust from worn concrete disappears entirely once the slab is sealed. Anything you store on the floor stays cleaner as a result.
Industry-leading epoxy floor coating systems go down on every job, chosen for adhesion and long-term wear rather than what's cheapest by the gallon. Topcoats are matched to how the space actually gets used. Cutting corners on material is how a floor ends up peeling, and that's not a callback anybody wants.
Traction gets built right into the topcoat with fine aggregate blended in, keeping the surface sure-footed when it's wet. Garages that see snow melt, hose water, or the occasional oil leak benefit most from this. The grit level is adjustable, so the floor remains easy to mop while still gripping underfoot.
Decorative flakes broadcast into the wet coating add texture, depth, and a bit of forgiveness in hiding dirt. Blends range from subtle grays to bolder color mixes, and flake size can change the look considerably. This finish remains the most popular choice among our customers.
Deep blue, red, gray, and classic black are all on the table for a clean, uniform look. Matte or high-gloss finishes change the character of the room quite a bit, and we'll show you samples of both. Uniform color also makes a small garage feel larger and brighter.
Metallic pigments swirl during application, creating a reflective surface that reads like polished stone or marble. No two floors come out identical, which is a big part of the appeal. Showroom garages and finished basements are where these tend to land.
Personal touches like a logo, a stripe, or a custom pattern can be worked into the floor during installation. Car enthusiasts and business owners tend to be the ones who ask, though nothing stops a homeowner from putting a monogram in the middle of the bay. Designs get mapped out with you before any material goes down.
Basements take the same treatment as garages, turning cold gray slabs into finished-looking space for a workshop, gym, or playroom. Moisture testing matters even more below grade, and we check before quoting rather than after.
Warm weather is a requirement, not a preference, so our season runs March through November or whenever temperatures stay above 60 degrees. Cold slabs slow the cure and weaken the bond, which is why we'd rather reschedule than rush a winter install. Booking ahead in early spring usually gets you the best spot on the calendar.
When your current door is damaged, outdated, or becoming unreliable, we'll help you compare standard, wood, full-view, and custom options that suit your home and budget. Our garage door replacement service includes careful measurements, professional installation, system testing, and available upgrades such as myQ controls or battery backup.
A broken spring, loose cable, off-track roller, damaged weather seal, or crooked door can quickly disrupt your day, so we start by finding the actual cause of the problem. Our garage door repairs cover residential and commercial systems, along with maintenance options such as our $199 Gold Plan and $249 Ultimate Plan. We'll explain what needs attention, complete the work safely, and help you reduce the chance of another surprise later.
Building a new home or garage comes with plenty of choices, and we'll make the door system easier to sort out. Our new construction systems include steel, aluminum, wood composite, glass, and custom designs with options for windows, insulation, decorative hardware, myQ access, and battery backup.
Sometimes the door itself is fine, but the opener is noisy, slow, or no longer lifting the way it should. We repair and replace garage door motors, including LiftMaster and other trusted brands, with chain-drive, belt-drive, and heavy-duty operator options available. Our team will first check the entire system, explain whether repair or replacement makes more sense, and set up the motor for smooth everyday use.
If tools, bikes, boxes, and seasonal gear have taken over your floor space, we can design a layout that makes the garage easier to use. Our garage organization and storage services include overhead racks, above-door shelving, wall cabinets, pegboards, hooks, workbenches, and tool-storage systems tailored to your space.
We keep flooring projects approachable by offering useful guidance, thoughtful product choices, and clear support from the estimate through the completed surface.
Being a certified distributor for Amarr, one of the world's leading garage door manufacturers, reflects the standards we hold across all our work, including installations involving Chamberlain, doorLink Manufacturing, Haas Door, Hörmann, LiftMaster, and Linear.
Measuring your space and pricing the project costs nothing, and you'll see color options during the same visit.
Anyone currently serving or who has served in the military receives 10% off, while seniors and first responders receive 5%.
Our labor is covered by a one-year warranty, giving you someone to turn to if anything needs attention.
Epoxy flooring can perform well in North Carolina, but installers must check the concrete, air temperature, humidity, and dew point before application. Excess moisture or condensation can interfere with bonding and leave blemishes in the finished coating.
The timeline for epoxy flooring depends on the floor's condition, required repairs, the coating system, and temperature and humidity. Surface preparation and application may take a day or more, and the coating may require additional curing time before it can support foot traffic, vehicles, or heavy equipment.
Smooth epoxy flooring may become slick when water, oil, or other fluids sit on the surface. Installers can mix an anti-skid additive into the coating or apply a textured finish to provide more traction in garages and basements.
Successful epoxy flooring starts with clean, sound concrete that's free from dirt, grease, loose material, and coatings that could weaken adhesion. Installers may clean, repair, etch, grind, or mechanically prepare the floor, then check for excess moisture before applying the coating.
Warmer months usually provide better conditions for epoxy flooring because many products need stable surface and air temperatures to cure correctly. In Salisbury, installers commonly schedule these projects from spring through fall, with many systems performing best when temperatures remain around 60 degrees Fahrenheit or warmer.
FAQs reviewed by Jordan Pierce, co-founder and co-owner of Elevated Garage Solutions, a certified garage door supplier.
Reach out to us for a free estimate, and we'll assess your concrete, talk through colors and finishes, and honestly tell you what your floor needs. Our season runs March through November, so the calendar fills up faster than you'd think.
Business Name: Elevated Garage Solutions
Address: Salisbury, NC, 28146
Phone: 336-844-1705
Business Hours:
Mon - Fri: 8:00 AM to 6:00 PM
Saturday: 8:00 AM to 5:00 PM
Open until midnight every night for emergency calls ($75 service fee may apply).
1-year labor warranty
Military & Senior Discounts Available
10% Off for Active Duty Military & Veterans
5% Off for First Responders & Seniors